View MOCD213_10523.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MOCD213/D
Dual Channel Small Outline Optoisolator
Transistor Output
This device consists of two gallium arsenide infrared emitting diodes optically coupled to two monolithic silicon phototransistor detectors, in a surface mountable, small outline, plastic package. It is ideally suited for high density applications and eliminates the need for through-the-board mounting. * Dual Channel Coupler * Convenient Plastic SOIC-8 Surface Mountable Package Style * Minimum Current Transfer Ratio 100% with Input Current of 10 mA * Minimum V(BR)CEO of 70 Volts Guaranteed * Standard SOIC-8 Footprint, with 0.050 Lead Spacing * Shipped in Tape and Reel, which Conforms to EIA Standard RS481A * Compatible with Dual Wave, Vapor Phase and IR Reflow Soldering * High Input-Output Isolation of 3000 Vac (rms) Guaranteed * Meets U.L. Regulatory Requirements, File #E54915 Ordering Information: * To obtain MOCD213 in tape and reel, add R2 suffix to device number as follows: R2 = 2500 units on 13 reel * To obtain MOCD213 in quantities of 50 (shipped in sleeves) -- no suffix Marking Information: * MOCD213 = D213 Applications: * Feedback Control Circuits * Interfacing and Coupling Systems of Different Potentials and Impedances * General Purpose Switching Circuits * Monitor and Detection Circuits MAXIMUM RATINGS (TA = 25C unless otherwise noted)
Rating INPUT LED Forward Current -- Continuous Forward Current -- Peak (PW = 100 s, 120 pps) Reverse Voltage LED Power Dissipation @ TA = 25C Derate above 25C OUTPUT TRANSISTOR Collector-Emitter Voltage Collector-Base Voltage Emitter-Collector Voltage Collector Current -- Continuous Detector Power Dissipation @ TA = 25C Derate above 25C VCEO VCBO VECO IC PD 70 70 7.0 150 150 1.76 V V V mA mW mW/C IF IF(pk) VR PD 60 1.0 6.0 90 0.8 mA A V mW mW/C Symbol Value Unit
MOCD213
[CTR = 100% Min]
DUAL CHANNEL SMALL OUTLINE OPTOISOLATOR TRANSISTOR OUTPUT
CASE 846-01, STYLE 3 PLASTIC
SCHEMATIC
1 2 3 4 8 7 6 5
1. 2. 3. 4. 5. 6. 7. 8.
ANODE 1 CATHODE 1 ANODE 2 CATHODE 2 EMITTER 2 COLLECTOR 2 EMITTER 1 COLLECTOR 1
NOTE: Thickness through insulation between input and output is 0.5 mm.
REV 2
(c)MotorolaInc. 1995 Motorola, Optoelectronics Device Data
1
MOCD213
MAXIMUM RATINGS--continued (TA = 25C unless otherwise noted)
Rating TOTAL DEVICE Input-Output Isolation Voltage(1,2) (60 Hz, 1.0 sec. duration) Total Device Power Dissipation @ TA = 25C Derate above 25C Ambient Operating Temperature Range(3) Storage Temperature Range(3) Lead Soldering Temperature (1/16 from case, 10 sec. duration) VISO PD TA Tstg -- 3000 250 2.94 -55 to +100 -55 to +150 260 Vac(rms) mW mW/C C C C Symbol Value Unit
ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted)(4)
Characteristic INPUT LED Forward Voltage (IF = 30 mA) Reverse Leakage Current (VR = 6.0 V) Capacitance OUTPUT TRANSISTOR Collector-Emitter Dark Current (VCE = 10 V, TA = 25C) (VCE = 10 V, TA = 100C) ICEO1 ICEO2 V(BR)CEO V(BR)ECO CCE MOCD213 IC (CTR)(5) VCE(sat) ton toff tr tf VISO RISO CISO -- -- 70 7.0 -- 10 (100) -- -- -- -- -- 3000 1011 -- 1.0 1.0 120 7.8 7.0 -- 0.15 3.0 2.8 1.6 2.2 -- -- 0.2 50 -- -- -- -- -- 0.4 -- -- -- -- -- -- -- nA A V V pF mA (%) V s s s s Vac(rms) pF VF IR C -- -- -- 1.2 0.1 18 1.55 100 -- V Symbol Min Typ(4) Max Unit
mA
pF
Collector-Emitter Breakdown Voltage (IC = 100 A) Emitter-Collector Breakdown Voltage (IE = 100 A) Collector-Emitter Capacitance (f = 1.0 MHz, VCE = 0) COUPLED Output Collector Current (IF = 10 mA, VCE = 5 V)
Collector-Emitter Saturation Voltage (IC = 2.0 mA, IF = 10 mA) Turn-On Time (IC = 2.0 mA, VCC = 10 V, RL = 100 ) Turn-Off Time (IC = 2.0 mA, VCC = 10 V, RL = 100 ) Rise Time (IC = 2.0 mA, VCC = 10 V, RL = 100 ) Fall Time (IC = 2.0 mA, VCC = 10 V, RL = 100 ) Input-Output Isolation Voltage (f = 60 Hz, t = 1.0 sec)(1,2) Isolation Resistance (VI-O = 500 V)(2) Isolation Capacitance (VI-O = 0, f = 1.0 MHz)(2) 1. 2. 3. 4. 5.
Input-Output Isolation Voltage, VISO, is an internal device dielectric breakdown rating. For this test, pins 1, 2, 3, and 4 are common, and pins 5, 6, 7 and 8 are common. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions. Always design to the specified minimum/maximum electrical limits (where applicable). Current Transfer Ratio (CTR) = IC/IF x 100%.
2
Motorola Optoelectronics Device Data
MOCD213
TYPICAL CHARACTERISTICS
I C, OUTPUT COLLECTOR CURRENT (NORMALIZED) 2 VF , FORWARD VOLTAGE (VOLTS) PULSE ONLY PULSE OR DC 1.8 1.6 10 NORMALIZED TO: IF = 10 mA 1
1.4 TA = - 55C 1.2 1 25C 100C 1 10 100 IF, LED FORWARD CURRENT (mA) 1000
0.1
0.01
0.5
1 2 5 10 20 IF, LED INPUT CURRENT (mA)
50
Figure 1. LED Forward Voltage versus Forward Current
16 14 12 10 8 6 4 2 0 0 1 2 3 4 5 6 7 8 9 10 IF = 10 mA I C , OUTPUT COLLECTOR CURRENT (NORMALIZED) 10
Figure 2. Output Current versus Input Current
I C, OUTPUT COLLECTOR CURRENT (mA)
NORMALIZED TO: TA = 25C
1.0
0.1 -60
-40
-20
0
20
40
60
80
100 120
VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS)
TA, AMBIENT TEMPERATURE (C)
Figure 3. Output Current versus Collector-Emitter Voltage
ICEO, COLLECTOR-EMITTER DARK CURRENT (NORMALIZED)
Figure 4. Output Current versus Ambient Temperature
20 103 102 101 100 NORMALIZED TO: VCE = 10 V TA = 25C VCE = 70 V C, CAPACITANCE (pF) 30 V 10 V 18 16 14 12 10 8 6 4 0 20 40 60 TA, AMBIENT TEMPERATURE (C) 80 100 2 0.01 0.1 1 V, VOLTAGE (VOLTS) 10 100 CCE CLED f = 1 MHz
10-1
Figure 5. Dark Current versus Ambient Temperature
Figure 6. Capacitance versus Voltage
Motorola Optoelectronics Device Data
3
MOCD213
PACKAGE DIMENSIONS
-A-
8
5
K
1 4
B
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. INCHES MIN MAX 0.182 0.202 0.144 0.164 0.123 0.143 0.011 0.021 0.050 BSC 0.003 0.008 0.006 0.010 0.224 0.244 MILLIMETERS MIN MAX 4.63 5.13 3.66 4.16 3.13 3.63 0.28 0.53 1.27 BSC 0.08 0.20 0.16 0.25 5.69 6.19
G
D 8 PL 0.13 (0.005)
M
TA
M
-T-
SEATING PLANE
C
DIM A B C D G H J K
0.038 (0.0015) H J
STYLE 3: PIN 1. 2. 3. 4. 5. 6. 7. 8.
ANODE 1 CATHODE 1 ANODE 2 CATHODE 2 EMITTER 2 COLLECTOR 2 EMITTER 1 COLLECTOR 1
CASE 846-01 ISSUE B
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE (602) 244-6609 INTERNET: http://Design-NET.com
JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, Toshikatsu Otsuki, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-3521-8315 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298
4
*MOCD213/D*
Motorola OptoelectronicsMOCD213/D Device Data

▲Up To Search▲

Price & Availability of MOCD213

	To Download MOCD213 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .